Untitled
Home > SDX In-wall Collection (Concerto) > 62SDX - This item is discontinued.
62SDX SDX In-wall Collection (Concerto)
This item is discontinued. 62SDX
SearchField
2-Way Shallow Depth In-Wall

(1) 6.5" Neodymium Woofer (1) 1" Dome Tweeter Sealed Aluminum Enclosure

Designed for easy installation into 2x4 walls.
Additional Pictures
black cloth grill
black cloth grill		 Black Paintable Grill
Black Paintable Grill		 White Cloth Grill
White Cloth Grill		 White Paintable Grill
White Paintable Grill		 On-Wall Cabinets
On-Wall Cabinets		 Designed for standard 2 X 4 construction.
Designed for standard 2 X 4 construction.





Specifications

Size 17"h X 9.25"w X 3.875"d
Weight 17 lbs
Freq Response 50-20khz +/- 3 dB
Crossover AFDC 6 dB / Octave - Variable
Impedance 8 Ohms
Sensitivity 89 dB @ 2.83V@ 1 Meter
Power req. 50 - 200 Watts RMS recommended
Woofer (1) 6.5"
Tweeter (1) 1"
Finishes Black, white cloth or paintable grill

Downloads

 Brochure
2012 Color Brochure
 Installation
62-SDX Guide
 Reviews
La Mejor imagen
Recipe for Success
 Datasheet
62SDX Datasheet
Cad Drawings [Dealer only]
62SDX ASSEMBLY
62 SDX BRACKET.dwg
62 SDX CONSTRUCTION BOARD.dwg
62 SDX ENCLOSURE.dwg
62 SDX FRON PLATE.dwg


High resolution images for:
Assets for 62SDX
62-SDX Download

Frequently Asked Questions

Application/In-use
Q: The most effective way to painting James Aluminum perf grilles
A: There are many ways to paint James small holes aluminum perforated grilles. Here are a couple of painter’s trick that work well.
Spray rattle can method:
- The surface of the perforated grille must be thoroughly cleaned with a non-residue solvent.
- Raw aluminum perforated grilles must be primed before painting.
- Start with inside (rear) - this painting process will cover most of the perforated holes.
- Clogged perfs can be cleared with a shot of compressed air or air compressor.
- Let it dry sufficiently and turn the grille over.
- Working on the front side, the first coating must be a light spray (dusting), tilt the rattle can to about a 45 degree angle, let it dry for 15 minutes, light dust spray a second coat again until the whole surface is covered.
- A third and fourth spray coat may be required, “DO NOT OVER SPRAY”
- The grille must be completely dry before installing.
Water base paint:
- The surface of the perforated grille must be thoroughly cleaned with a non-residue solvent.
- Raw aluminum perforated grilles must be primed before painting.
- Add about 30% water (based on paint volume) to the water base paint to thin and mix well.
- Dab paint over inside (rear) of the perforated grille lightly using clean rag or foam material and let dry for an hour.
- Dab paint over front side of the perforated grille with rag or foam material.
- Must let it dry 20~30 minutes between steps.
- Once completed, let dry for a couple of hours prior to installation.
Warranty
Q: What is the James standard warranty?
A: Indoor loudspeaker systems (excluding electronics) - (10) years

Outdoor loudspeaker systems (excluding electronics) - (3) years

Marine loudspeaker systems (excluding electronics) - (3) years

Subwoofers (excluding electronic components) – (5) years

All electronic components (amplifiers, DSP, remotes etc) – (2) years